Dierks Sled Bow Roller System Left Side
Dierks Sled Bow Roller System with roller with the line running down the left gunnel through 2 PB4 pulleys to the jam cleat on left side near seat. Length 11.75 inches. Mounting plate hole spacing 3” width, 4” length. Jam Cleat JC4 is 5” long 1 ½” wide, holes are 3 7/8” on center. Great for jet sleds, prams, John boats or any bow with a flat deck. if the gunnel has a lip then a spacer (wood will do) of whatever thickness is needed to raise the arm up to hang over the edge.
SR4TP2S
Dierks Sled Bow Roller System with roller with the line running down the left gunnel through 2 PB4 pulleys to the jam cleat on left side near seat. Length 11.75 inches. Mounting plate hole spacing 3” width, 4” length. Jam Cleat JC4 is 5” long 1 ½” wide, holes are 3 7/8” on center. Great for jet sleds, prams, John boats or any bow with a flat deck. if the gunnel has a lip then a spacer (wood will do) of whatever thickness is needed to raise the arm up to hang over the edge.
SR4TP2S
Dierks Sled Bow Roller System with roller with the line running down the left gunnel through 2 PB4 pulleys to the jam cleat on left side near seat. Length 11.75 inches. Mounting plate hole spacing 3” width, 4” length. Jam Cleat JC4 is 5” long 1 ½” wide, holes are 3 7/8” on center. Great for jet sleds, prams, John boats or any bow with a flat deck. if the gunnel has a lip then a spacer (wood will do) of whatever thickness is needed to raise the arm up to hang over the edge.
SR4TP2S