Dierks Sled Bow Roller System Right Side
Dierks Sled Bow Roller System with the line running down the right gunnel through 2 PB4 pulleys to the jam cleat on right side near seat. Arm length 11.75 inches. Mounting plate hole spacing 3” width, 4” length. Jam Cleat JC4 is 5” long 1 ½” wide, holes are 3 7/8” on center. Great for jet sleds, prams, John boats or any bow with a flat deck. if the gunnel has a lip then a spacer (wood will do) of whatever thickness is needed to raise the arm up to hang over the edge.
SA5TP2LS
Dierks Sled Bow Roller System with the line running down the right gunnel through 2 PB4 pulleys to the jam cleat on right side near seat. Arm length 11.75 inches. Mounting plate hole spacing 3” width, 4” length. Jam Cleat JC4 is 5” long 1 ½” wide, holes are 3 7/8” on center. Great for jet sleds, prams, John boats or any bow with a flat deck. if the gunnel has a lip then a spacer (wood will do) of whatever thickness is needed to raise the arm up to hang over the edge.
SA5TP2LS
Dierks Sled Bow Roller System with the line running down the right gunnel through 2 PB4 pulleys to the jam cleat on right side near seat. Arm length 11.75 inches. Mounting plate hole spacing 3” width, 4” length. Jam Cleat JC4 is 5” long 1 ½” wide, holes are 3 7/8” on center. Great for jet sleds, prams, John boats or any bow with a flat deck. if the gunnel has a lip then a spacer (wood will do) of whatever thickness is needed to raise the arm up to hang over the edge.
SA5TP2LS