Dierks Anchor Side Pull Conversion Kit RB8642

$138.95

If you have a Dierks Anchor Arm with Jam Cleat AR12 or SA12, you can convert it to the Side Pull System (see pictures on Anchor Systems page) with these parts. Just replace the Jam Cleat on the anchor arm with the TP2 pulley and put the jam cleat on the Hand Piece and mount as shown in the Installation Info, mount the PB4 pulleys on the gunnel and you will have the Cadilac of anchor systems. Works with either the Side mount or Center mount anchor arms. The pulleys have a 1/4" mounting hole for a 20 thread count bolt. The end may have to be cut off to keep the bolt from interfering with the rope. Dress bolt end with file and use LockTite when mounting pulley.

RB8642

If you have a Dierks Anchor Arm with Jam Cleat AR12 or SA12, you can convert it to the Side Pull System (see pictures on Anchor Systems page) with these parts. Just replace the Jam Cleat on the anchor arm with the TP2 pulley and put the jam cleat on the Hand Piece and mount as shown in the Installation Info, mount the PB4 pulleys on the gunnel and you will have the Cadilac of anchor systems. Works with either the Side mount or Center mount anchor arms. The pulleys have a 1/4" mounting hole for a 20 thread count bolt. The end may have to be cut off to keep the bolt from interfering with the rope. Dress bolt end with file and use LockTite when mounting pulley.

RB8642